NEWS RELEASE                                                                                         January 2019

Industrial Ventilation and Dust Collection should not be Two Different Silos

Carefully engineered ductwork systems for frac sand plants (outdoors) have the same needs for optimum hood designs and balanced flow ductwork (without dampers) as industrial ventilation systems in foundries (indoors). Both have the same stringent regulations regarding silica dust. Industrial ventilation covers many types of air flow other than those ducted to a dust collector. On the other hand the ventilation design used at the pickup points in a dust collector system has a direct effect on the system cost and energy consumption.

A well designed hood utilizes only as much capture air as is needed. The cost of the dust collector is a function of flow. So a hood that requires twice as much capture air results in twice the system cost. A balanced ductwork system maintains the best velocity. It is not so high as to cause abrasion and excess energy consumption. It has to be high enough to insure that material does not deposit in the ductwork. Dampers need to be avoided because they cause turbulence and plugging. A correctly designed system uses tapered ducting and a constant duct velocity throughout the system. Also turbulence is avoided with gradual rather than abrupt changes in direction.

nr2472

Minimum Turbulence Components Courtesy of ICAC-Intl

The concern for worker exposure to particulates is primarily focused on individuals working in environments such as foundries and coal mines where silica dust is generated. However, the concern for workers is just as great in frac sand plants and facilities which create toxic metal dust. John Brown of IAC-Intl in a recorded presentation linked from the McIlvaine Global Decisions Orchard reviews the needs and solutions for frac sand plants. He also references both primary and secondary lead plants where fine particulate emission limits are much lower than they are for silica.

There are a number of companies who are eliminating the two silos. CECO has acquired Kirk & Blum, a major ventilation contractor. It also acquired Flex-Kleen and other companies making air pollution control equipment. Nederman purchased MikroPul to complement its ventilation activities. In April 2018 it purchased Auburn FilterSense which makes triboelectric dust monitors commonly descibed as broken bag detectors. This gives Nederman a tool by which to remotely monitor the system operation and schedule bag replacement as needed for environmental and other reasons.

3M has introduced a blue tooth enabled pressure sensor which is inexpensive enough than it can be placed on every furnace filter. This technology has even more justification for use in industrial ventilation systems. Those systems dealing with toxic dusts have even more justification to install continuous monitoring devices.

Companies such as IAC-Intl, Nederman and CECO have the opportunity to be involved with industrial ventilation and dust control from the design and construction through the entire life of the system. New analyzers, data analytics and process management software make remote monitoring and O&M support very valuable. The biggest profit potential is total solutions. The supplier can provide a fixed price for O&M and replacement parts. With skilled remote operators, the cost to the owner can be less than if the O&M is handled in-house.

More information on this concept is contained in two McIlvaine publications

N031 Industrial IOT and Remote O&M

N021 World Fabric Filter and Element Market

Bob McIlvaine can answer your questions at 847 784 0012 ext. 122 This email address is being protected from spambots. You need JavaScript enabled to view it.